GB/T 613-2007/XG1-2009 《化学试剂 比旋光本领(比旋光度)测定通用方法》国家标准第1号修改单

作者:标准资料网 时间:2024-04-29 22:50:33   浏览:8071   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:《化学试剂 比旋光本领(比旋光度)测定通用方法》国家标准第1号修改单
英文名称:Chemical reagent—General method for the determination of specific optical rotatory power(specific optical rotation)
中标分类: 化工 >> 化学试剂 >> 化学试剂综合
ICS分类: 化工技术 >> 分析化学 >> 化学试剂
替代情况:替代GB/T 613-1988
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2009-03-24
实施日期:2009-07-01
首发日期:
作废日期:
主管部门:中国石油和化学工业协会
提出单位:中国石油和化学工业协会
归口单位:全国化学标准化技术委员会化学试剂分会(SAC/TC 63/SC 3)
起草单位:国药集团化学试剂有限公司
起草人:陈浩云、陈红
出版社:中国标准出版社
出版日期:2008-04-01
页数:8页
适用范围

本标准规定了用旋光仪测定化学试剂比旋光本领的通用方法。本标准适用于化学试剂比旋光本领的测定。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
JJG536-1998 旋光仪及旋光糖量计

所属分类: 化工 化学试剂 化学试剂综合 化工技术 分析化学 化学试剂
下载地址: 点击此处下载
【英文标准名称】:Plasticspipingsystemsforindustrialapplications-Acrylonitrile-butadiene-styrene(ABS),unplasticizedpoly(vinylchloride)(PVC-U)andchlorinatedpoly(vinylchloride)(PVC-C)-Specificationsforcomponentsandthesystem;Metricseries(ISO15493:20
【原文标准名称】:工业用塑料管道系统.丙烯腈-丁二烯-苯乙烯塑料(ABS)、未增塑的聚氯乙烯(PVC-U)和氯化聚氯乙烯(PVC-C).元件和管道系统规范.米制系列
【标准号】:ENISO15493-2003
【标准状态】:现行
【国别】:
【发布日期】:2003-10
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:材料强度;冷水管;总论;米制的;防抱死制动系统;给水;水管;合格;输水管道;温水;热塑性的;定义;管联接器;管道配件;塑料管;加热系统;物理性能;塑料;工业的;管道;热水;丙烯腈-丁二烯-苯乙烯共聚物;合格试验;工业管道系统;厘米克秒制;机械性能;配件;检验;未增塑聚氯乙烯;未增塑聚氯乙烯;分类;水常规(实验);建筑物;直径;阀门;规范;上方的;管道装置;冷水;管系统;聚乙烯管;聚氯乙烯;水;尺寸;建筑物服务设施;装置;试验;管;运输;作标记;耐力;氯化聚氯乙烯;特性;规范(验收);材料
【英文主题词】:ABS;Acrylonitrilebutadienestyrene;Buildingservices;Buildings;CGSsystem;Classification;Coldwater;Coldwaterconduit;Conformity;Definition;Definitions;Diameter;Dimensions;Fittings;Generalsection;Heatedsystems;Hotwater;Industrial;Industrialpipeworksystems;Inspection;Installations;Marking;Materials;Mechanicalproperties;Metric;Overhead;Physicalproperties;Pipecouplings;Pipefittings;Pipelineinstallations;Pipelines;Pipes;Pipingsystem;Plasticpipes;Plastictubes;Plastics;Polyvinylchloride;Properties;PVC-C;PVC-pipes;PVC-U;Qualificationtests;Resistance;Specification;Specification(approval);Strengthofmaterials;Testing;Thermoplastic;Transport;Unplasticizedpolyvinylchloride;Valves;Warmwater;Water;Waterpipelines;Waterpipes;Waterpractice;Watersupply
【摘要】:
【中国标准分类号】:G33
【国际标准分类号】:23_040_01
【页数】:72P.;A4
【正文语种】:英语


Product Code:SAE AMS3357
Title:Rubber, Silicone (Vmq), Lubricating Oil and Compression Set Resistant, 65-75
Issuing Committee:Ams Ce Elastomers Committee
Scope:This specification covers a silicone (VMQ) rubber in the form of sheet, strip, tubing, extrusions and molded shapes. Primarily for parts required to operate or seal from -55 to +230 degrees C (-67 to +446 degrees F), compounded especially for aircraft piston engine oil resistance and low compression set. Silicone elastomer is resistant to deterioration by weathering and by high-aniline-point petroleum-base oils and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.